Dosing Pump

Product Details:

C.R.I. Vertical Multistage Inline pumps are the products of expertise gained from over four decades of experience, endurance and workmanship.

Product Details:

We are dealing in Electronic Dosing Pump 0-6 LPH and offering this at a very good price too

Product Details:

Teflon (PTFE)Diaphrgm,Microprocessor based technology,Double ball NRV,digitally adjustable stroke ,230 V AC supply,built in air release valve and capcity 0-6 lph ,0-10 lph 

Product Details:

Dosing pumps are low-volume pumps with controllable discharge rates that are used to inject additives or difficult to mix fluids into mixing, pumping, or batch/tank systems. Dosing pumps are usually made from plastic, thermo plastic, and feature mounting holes or accessories. Single diaphragm models are available. Some dosing pumps are designed to move:

• Abrasive materials,
• Acids, adhesives,
• Chemicals,
• Concrete and grout,
• Coolants,
• Hazardous materials,
• Liquid metal, or lubricants.

Other devices are rated for combustible, corrosive, high viscosity, or high temperature media. Dosing pumps are also used to move:

• Gasoline,
• Diesel fuel, and oil;
• Ground water,
• Potable water,
• Salt water, and wastewater;
• Sewage, sludge,slurry and ash slurry;
• Gas and air; powders, solids, and rendering wastes;
• And a variety of liquids and liquids with solids.

Product Details:

Dosing pumps are low-volume pumps with controllable discharge rates that are used to inject additives or difficult to mix fluids into mixing, pumping, or batch/tank systems. Dosing pumps are usually made from plastic, thermo plastic, and feature mounting holes or accessories. Single diaphragm models are available. Some dosing pumps are designed to move:

• Abrasive materials,
• Acids, adhesives,
• Chemicals,
• Concrete and grout,
• Coolants,
• Hazardous materials,
• Liquid metal, or lubricants.

Product Details:

We, Adwyn Chemicals Pvt. Ltd. Pumping Systems are reputed manufacturers and suppliers of Metering Pumps, Dosing Pumps, Fluid Metering Pumps, Electromechanical Dosing Pumps, and Industrial Metering Pumps. These pumps are used where fluids must be dosed into a medium with a highest possible grade of accuracy with a defined volume and within a defined time period.

Functioning:-

These Dosing or Metering Pumps (oscillating positive displacement pumps) suck in a defined fluid volume with the backstroke of the displacer and press it into the dosing line with the pressure stroke. Adjusting the stroke volume and the dosing strokes per time unit can regulate the metering capacity.

MEEMP-

Solenoid driven metering pumps are controlled by an Electronic circuit comprising of professional PCB & electronic components of proven quality for high reliability to the user.

Applications:-

• Chemical feed systems are most suitable for metering

• Sodium hypo chloride

• Flocculants

• Softeners

• Cleansing agents

• Acids

• Caustics

• Dairy industries

• Food processing plant

• Pharmaceutical industries

• Sugar & confectionery

• Bottling plants

• Distillery

• Beverages

• Water treatment plants

• Colors dies & pigments / paints

• Descaling application

• Sagar industries

• Hot & cold water pumping

• sparkling filter press

• sugar syrup

• chemical processing

Features:-

• Low power consumption

• Modular design occupying less foot print & light weight

• Suction lift upto 1.5 mWc

• Steady state accuracy: /- 3%

• Repeatability : /- 3%

• Glandless & leakage free diaphragm pumps

• Solenoid driven aided by professional Pulser circuitry

• Excellent proportional control with higher turn-down ratio

• Adjustable Injection Frequency ( upto 120 SPM)

• Adjustable Volume displacement via Stroke length Adjustment

• Corrosion resistant GFPP Housing

• Unique spacer design for prevention of Chemical entry to drive end

• Teflon faced Hypalon Diaphragm for long lasting service

• Liquid ends - Polypropylene (PVC/SS316/PTFE—as optional)

 

Advantages of our Electronic magnetic Dosing pump :-

• (GFPP) Glass Filled Polypropylene Body, giving better chemical resistance than other metal body.

Precision Balls (Glass or Alumina Ceramic) in all check valve for better performance and better chemical resistance.

Running power consumption less than 25 watts.

 

Lesser weight of Pump Body easy to hand and portable.

• Integral Air bleed valve helps in relieving air block on the suction side of the pump.

Self balance foot valve for proper foot valve operation.

ugged and easy maintenance of the Foot Valve.

Molded Liquid Head for better dimensional accuracy and better chemical resistance.

Elastomers in Viton to suit various chemicals

 

Range

• Capacity Up to 1 TO 12 LPH

Discharge pressure Up to 10 bar (kg/sq. cm)

Stroke speed Up to 120 spm

Material of Construction

• Diaphragm :Teflon (PTFE) faced Hypalon

• Pump Head (liquid End) :PP—(Standard)

• (PVC / SS316 / PTFE as optional.

• Valves & Fittings :PP

Product Details:

It is a positive displacement solenoid operated diaphragm metering pump operating at 230 V 50 Hz supply. Solenoid pushes the diaphragm, which in turn pushes the liquid into the system. Solenoid is actuated & controlled by electric circuit

Dual Control:

It is a positive displacement diaphragm metering pump operating at 230 V 50 Hz supply. It is base mountable. Solenoid pushes the diaphragm which in turn pushes the liquid into the system. Solenoid is actuated by a solid state electronic circuit. It has two controls (stroke length & frequency control) for the desired accuracy of the dosing.

Salient Features:

• Housing & Head: An all plastic housing is resistant to corrosive chemical agents. Head & valves etc. all are made of Chemical resistant material for longer & reliable operation.
• Solenoid: High quality, hot rated solenoid is designed to dissipate heat. Capacities & pressure do not delete even over extended use.
• Diaphragm: Superior diaphragm is designed to ensure long life even under the most demanding applications. Teflon faced, metal reinforced diaphragm ensures leak free operation.
• Electronic Circuit: State of the art electronic circuit (protectively coated with epoxy) is virtually unaffected by temp, EMI & other electric disturbances.
• Controls: Both stroke length and frequency can be adjusted giving pump the desired accuracy. Turndown ratio is 100:1
• Capacity: Max. Capacity available is 15 Lt. per Hour

Applications:

• Water Chlorination
• Water Treatment
• Effluent Treatment
• Swimming Pool
• Food Processing
• Brewing and Distillation
• Chemical Processing

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: working days