CSM Membrane

Product Details:

We are instrumental in offering our clients a high quality range of 8x40inch envo namo Membrane. It is mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory. Provided membrane is manufactured by utilizing optimum quality raw material and latest technology. In line with industry standard we provide the entire range of membrane in various customized options and at affordable prices.

Features:

• Maximum working pressure: 300psi (2.07Mpa)
• Maximum feed water temperature: 45°C
• Maximum feed water SDI: 5
• Residual chlorine concentration of feed water: <0.1ppm
• PH range of feed water during continuous operation: 3-10
• PH range of feed water during chemical cleaning: 2-12
• Maximum pressure drop of single membrane element: 10psi (0.07Mpa)
• Testing conditions testing pressure: 60psi (0.41Mpa)
• Temperature of testing solution: 25°C
• Concentration of testing solution (NaCl): 250ppm

Specification:

• 8x40inch envo namoMembrane are residential membrane elements are mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory:Extreme operation conditions.
• Maximum working pressure: 300psi (2.07Mpa)
• Maximum feed water temperature: 45°C
• Maximum feed water SDI: 5
• Residual chlorine concentration of feed water: <0.1ppm
• PH range of feed water during continuous operation: 3-10
• PH range of feed water during chemical cleaning: 2-12
• Maximum pressure drop of single membran element: 10psi (0.07Mpa)
• Testing conditions testing pressure: 60psi (0.41Mpa)
• Temperature of testing solution: 25°C
• Concentration of testing solution (NaCl): 250ppm
• PH value of testing solution: 7.5

Additional Information:

• Delivery Time: immediate
• Packaging Details: cardborad packing

Product Details:

We are an acclaimed name engaged in offering our precious clients a superior quality range of Low Energy Membrane. This membrane is manufactured using optimum grade raw material and sophisticated technology in synchronization with industry standards. In order to ensure quality, the entire range of membrane is rigorously tested on various parameters by our quality controllers. It is used in producing drinking water, industrial water, pharmaceutical water, waste water treatment and concentration of food and/or medicine. Keeping in mind the diverse requirements of our clients, we provide entire range of membrane in various sizes and specifications and at affordable prices.

Features:

• Precisely design
• Easy installation
• Durability

Specification:

• Permeate flow rate: 1,900 GPD (7.2 m3/day) Nominal salt rejection: 99.6% Effective membrane area: 85 ft2 (7.9 m2) Feed spacer thickness: 32mi1
• The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:
• 1,500 mg/L NaCI solution at 150 psig (1.0 MPa) applied pressure • 15% recovery • 77 of (25 0C) • pH 6.5-7.0
• Minimum salt rejection is 99.4%. 3. Permeate flow rate for each element may vary but will be no more than 20%. 4. All elements are vacuum sealed in a polyethylene bag containing 1.0% SBS (sodium bisulfite) solution and individually packaged in a cardboard box.
• Membrane type: Membrane material: Element configuration:
• Thin-Film Composite Polyamide (PA) Spiral-Wound, FRP Wrapping
• Dimensions Part Number Model Name A B C D E Inter-Brine Seal connector 40.0 inch 4.0 inch 0.75 inch 1.05 inch 1.05 inch RE4040-BLR 40000305 40000306 (1,016 mm) (102 mm) (19.1 mm) (26.7 mm) (26.7 mm)

Product Details:

We are the leading and prominent Manufacturer, Exporter, Wholesaler, and Trader of Industrial CSM Membrane.

Product Details:

• Permeate flow rate: Nominal salt rejection: Effective membrane area: Feed spacer thickness:
• 2,000 GPD (7.6 m3/day) 99.7% 75 ft2 (7.0 m2) 34 mil
• The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:
• • 2,000 mg/L NaCl solution at 225 psi (1.5 MPa) applied pressure
  
• • 15% recovery
  
• • 77 of (25 0C)
  
• • pH 6.5-7.0
• Minimum salt rejection is 99.4%. 3. Permeate flow rate for each element may vary but will be no more than 15%. 4. All elements are vacuum sealed in a polyethylene bag containing 1.0% SBS (sodium bisulfite) solution and individually packaged in a cardboard box.
• Membrane type: Membrane material: Element configuration:
• Thin-Film Composite Polyamide (PA) Spiral-Wound, FRP Wrapping

Product Details:

We are instrumental in offering our clients a high quality range of 4x40inch CSM Membrane. It is mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory. Provided membrane is manufactured by utilizing optimum quality raw material and latest technology. In line with industry standard we provide the entire range of membrane in various customized options and at affordable prices.

Features:

• Maximum working pressure: 300psi (2.07Mpa)
• Maximum feed water temperature: 45°C
• Maximum feed water SDI: 5
• Residual chlorine concentration of feed water: <0.1ppm
• PH range of feed water during continuous operation: 3-10
• PH range of feed water during chemical cleaning: 2-12
• Maximum pressure drop of single membrane element: 10psi (0.07Mpa)
• Testing conditions testing pressure: 60psi (0.41Mpa)
• Temperature of testing solution: 25°C
• Concentration of testing solution (NaCl): 250ppm

Specification:

• 4x40inch CSM Membrane are residential membrane elements are mainly applicable to various small-sized systems, such as household water purifier and other water purifying devices in hospital and laboratory:Extreme operation conditions.
• Maximum working pressure: 300psi (2.07Mpa)
• Maximum feed water temperature: 45°C
• Maximum feed water SDI: 5
• Residual chlorine concentration of feed water: <0.1ppm
• PH range of feed water during continuous operation: 3-10
• PH range of feed water during chemical cleaning: 2-12
• Maximum pressure drop of single membran element: 10psi (0.07Mpa)
• Testing conditions testing pressure: 60psi (0.41Mpa)
• Temperature of testing solution: 25°C
• Concentration of testing solution (NaCl): 250ppm
• PH value of testing solution: 7.5