Reverse Osmosis Parts

Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry.

CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates for brackish water applications. High throughput, efficiency and cost-effectiveness make CPA membranes the best high-rejection brackish water RO membranes in the industry.

Because of its exceptionally high salt rejection, CPA membranes are used in power generation, pharmaceutical, electronics and semiconductor industry.

CPA2 is the second generation CPA high rejection brackish water RO membrane introduced in the early 1990’s. This membrane with 365 square feet of membrane area and 99.7% rejection remains popular today as a robust work-horse product for Hydranautics.

CPA2 is popularly used in the treatment of brackish waters to produce low TDS permeate.

CPA2 membrane is available in diameters of 4.0 and 8.0 inches.

Features:

• Password protected setting.
• 128*64 Graphics Display for display the faults and on-going process.
• 5 Key for interface
• Manual total flow reset facility

Specification:

• Input Supply : 230V AC 50 Hz
• Resolution: 1 liter.

Key operation:

• SET: Hold the SET key for 2-4 seconds to enter in SET mode. Also the same key is use for right shift when set the password or set any parameter
• INC: by INC key one can increment the value in respective setting.
• DEC: by DEC key one can decrement the value in respective setting.Also the same key uses for reset the fault manually.
• ENT: by ENT key one can ENTER in menu and after setting the respective value by this key one can save same setting.
• BACK: by BACK key one can return to the previous menu or in the display mode.
• Password for all menus 1234569860.

Working:

After warm up time of 10 Sec display will show the flow rate in LPH and below that the Total flow will show.

Setting Mode:

In setting menu the following menus are available for setting:

1. View Total
   

   • Sensor Factor
   • Auto Calibration
   • Other Settings
   • Clear Data

In View Total setting one can see the total flow count.

1. Sensor Factor

In Sensor Factor setting one can calibrate the flow sensor.

Default sensor factor is 100.00 and it is in percentage.

1. Auto Calibration

For calibrate the flow meter unit for 1 liter go at Auto calibration setting and enter the password.Then press Enter key and start actual flow to measure 1 liter water. Display will show approximate 360 to 370 counts for 1 liter water Press Enter key again to save the calibration.

1. Other Settings

In Other setting there is an option for adjust the display contrast.

1. Clear Data:

In Clear Data setting one can reset the total flow and other setting also.

Keeping in the mind various requirements of our clients, we are offering premium quality UV Water Filter. Our offered water filter is manufactured using the best quality raw material and cutting edge technology in sync with industry norms. In addition to this, provided water filter is available in variegated sizes and designs as per the demands of our clients. We offer this water filter to our customers at budget friendly prices.

Features:

• Rust free
• Easy to use
• Perfect finish

• Wetted rubber parts made up of food grade silicon to avoid bad odor & detraction due to U.V.
• Specially designed wiper assembly for easy operation without stopping the operation of the unit
• Quartz jacket does not allows the particles to settle down in the assembly
• Optional alarm system for giving signal in case of any lamp failure
• Each quartz jacket is provided with a specially designed wiper assembly for removing any particles that get settled on the Quartz tube
• The power panel of the system capable of withstanding voltage fluctuations up to 5%
• All the U.V. Further, cables are protected with a spiral shield and U.V. Lamps are provided with an indicator lamps to showcase the burning of U.V. lamps
• The capacity our offered system ranges from 100 ltrs. / hr. to 1, 00,000 ltrs. / Hr

We Offer Special Rate For Bulk Quantity and All so High Sea Sale.

We have firmly placed ourselves amid the top raked suppliers of high grade 4040, 8040 CSM Membranes (Water Treatment Membranes). The offered range membranes are developed using the top quality raw material as per the defined industry values. These are available in different specifications so as to meet different requirements of clients. In our collection, one can get brackish, Low energy and seawater elements. We generally offer CSM membranes. Hydranautics and Down are some other products of its same kind.

Features:

•Low Energy Consumption
•up to 99.7% Salt Reduction
•Excellent Cleaning Capability
•Longer Life

Bag and cartridge filters are simple and easy-to-operate systems that use a woven bag or a cartridge with a wound filament filter to physically strain microbes and sediment from source water as it is passed through the filter medium. These systems are effective against Giardia cysts, but not are sufficient to eliminate bacteria, viruses, or chemicals. Thus, they are most appropriate for higher quality source waters and those with limited turbidity. Bag and cartridge technology is developing rapidly and is tailored for use in small scale treatment facilities. Such systems also deliver ease of operation and maintenance, with little skill required on the part of the operator. Costs are variable depending on how often the filters must be changed.

Features:

• Media is Polypropylene
• High performance
• Welded seam bags
• PP and SS ring
• Heavy Duty and Extended Life designs available to suit your filtration needs
• Acid proof, alkali proof, anti corrosion
• Temperature: 90-100 C
• High cost performance
• Filter precision: 1-100 micron
• Good for viscous fluid filtration
• High flow rates
• Low pressure drop
• Broad chemical compatibility
• High dirt holding capacity
• Simple maintenance

We are the renowned manufacturer and exporter of Water Pressure Gauges. Known for their resistance to corrosion and perfect finish, these offered gauges are highly popular in the market. Manufactured in compliance with the set industry standards, the range of the water pressure gauges offered by us is highly demanded among our client-base spread across the nation.

Specifications:

• Dial Size : 2 ½", 4", 6" , 8", 10"

• Case & Bezel : SS 304/ Die Cast Aluminium Weather Proof

• Window : Toughened Glass, Plain Glass, Acrylic Glass

• Pointer : Micro Zero or center zero adjustable

• Movement Material : SS 304/Brass

• Bourdon Material : SS 316/Brass

• Socket Material : SS 316/Brass

• Entry : Bottom Back

• Mounting : Direct, Panel, Surface

To establish a prominent presence in the market we are engaged in manufacturing and supplyingRO Plant Part. The part includes, cartridge filter, filter media, dosing pump, pressure tube, activated carbon and pressure vessel. We use optimum quality materials, sourced from reputed vendors to manufacture this part. This part is used in industrial and commercial water and waste water treatment plants. Clients can avail this RO Plant Part from us in different sizes and specifications as per their requirements.

Features:

• Easy to install
• Rugged construction
• Maintenance free